Visit HYTEK Online Store  
HYTEK Automation, Inc.

Voltage Divider DIV4 (In Stock)

4 channels voltage divider/shifter that can convert ±10V, ±5V or 0-10V to iUSBDAQ measurable range of 0-4V. Isolated out
This is a 4 channels voltage divider. There are three input voltage ranges for selection:
0-10V, ±10V, ±5V
the divider will convert voltage to output 0-4V, which falls into iUSBDAQ measuring range.
The outputs are isolated with buffering amplifiers.
Please specify the range when purchasing.
The default range is ±5V without specification.

The voltage conversion can be calculated based on below forms:
0-10V: Vout=0.4VIN
±5V: Vout=0.39791VIN +2.05875
±10V: Vout=0.19718VIN+2.07685
VIN: Input voltage
Vout;Output voltage
Size: 30mm*26mm
The input site has screw terminals, the pin order are:AGND, Vin1, Vin2, AGND, Vin3, Vin4.
The output site are pins that can plug directly into iUSBDAQs pin1 - pin7, the pin order are
+5V, AGND, Vout1, Vout2, AGND, Vout3, Vout4.
Board Image:

Related Products:

Lowest cost USB data acquisition module with 8 c...
The unique 3-in-1 USB data acquisition module wi...
Low cost USB data acquisition module with 8 chan...
USB DAQ with 8 channel voltage signal conditioni...

©Copyright 2009 HYTEK Automation, Inc. All rights reserved.